100mm Unilin FR-BGM Flat Roof Insulation Board

The 100mm FR-BGM Flat Roof Insulation Board from Unilin delivers superior thermal performance with a polypropylene fleece exterior layer combined with a bitumen/glass fibre working surface. A mineral glass facing on the underside completes the construction. This product represents part of Unilin's comprehensive range of high-performance 100mm flat roof boards, providing integrated solutions for diverse flat roof applications.

100mm Unilin FR-BGM Flat Roof Board was previously known as 100mm Xtratherm FR-BGM.

Product Specification

Brand: Unilin / Xtratherm®

Model: 100mm FR/BGM

Thickness: 25mm,30mm,40mm, 50mm, 60mm, 70mm, 80mm, 100mm, 110mm, 120mm, 130mm, 140mm, 150mm

Length: 1200mm

Width: 600mm

Board Coverage: 0.72m2

Pack Coverage: 3.60 m2

Pack Quantity: 5

R-Value: 3.75m2K/W

Thermal Conductivity: 0.024W/mK

Compressive Strength: 150kPa

Dimensions: 1,200mm x 600mm x 100mm

Colour: Yellowish

Density: 32kg/m3

Material: Polyisocyanurate (PIR Insulation)

Profile: Square Edge

Inner facing: Mineral Glass

Outer facing: Bitumen/glass fibre

Shipping method: Articulated Vehicle ǀ Courier

Applications: Flat Roof

BBA Certified: Yes (No. 11/4878)

ETA Notification: Yes

Features: Thermally efficient flat roof board

About

The 100mm Unilin FR-BGM forms a key element within Unilin's extensive portfolio of high-performance flat roof boards, delivering multiple advantages for flat roof construction:

1. Exceptional thermal performance: This 100mm board provides outstanding insulation properties, maintaining consistent internal building temperatures throughout the year.
2. Bituminous roofing system compatibility: Engineered for seamless integration with a comprehensive range of bituminous roofing systems, simplifying installation and ensuring structural compatibility.
3. Polypropylene fleece finished bitumen/glass fibre surfaces: The fleece-finished bitumen/glass fibre working surface enhances durability and provides a robust, long-lasting performance solution.
4. Environmental Product Declaration (EPD) certification: The 100mm Unilin Flat Roof Insulation Board BGM carries EPD certification from the IGBC (International Green Building Council). Contact our technical support team for comprehensive information.

Key Points:

1. Delivers excellent thermal performance.
2. Features polypropylene fleece finished bitumen/glass fibre facings.
3. FR-BGM permits direct application of torch on felt to the insulation surface.
4. Works effectively with a broad spectrum of bituminous based roofing systems.

Roof Design

The 100mm Unilin Insulation Boards are engineered for compatibility with an extensive range of bitumen-based waterproofing systems. These installations typically employ a BS EN 13707:2013 type 3G perforated base layer or proprietary roof waterproofing solutions. Position the fleece side facing upwards during installation, or alternatively apply full bonding. For moisture and condensation management guidance, consult BS 8217 specifications for reinforced bitumen membranes in roofing applications.

Falls

Flat roof design must incorporate adequate fall to prevent water pooling and ensure proper drainage.

Roof Loading

The 100mm Unilin FR/BGM boards suit roof decks with minimal foot traffic and low maintenance requirements. Where regular pedestrian access is required, install protective walkways on the roof surface. Following roof construction completion, lay protective boarding if additional site work is anticipated. This protects the roofing system integrity.

Roof Finish

Built-up roofing systems require finishing with a suitable reflective layer such as chippings. Consult the system manufacturer for specific recommendations.

Fire Performance

Fire rating, when assessed to EN 13501-5 and BS 476 Part 3 'External Fire Exposure Roof Test', depends on the specified waterproofing system.

Vapour Control Layer

Prime decks before applying hot bitumen for vapour control layer bonding. Refer to BS 8217 for vapour control layer application procedures. Extend the VCL past the insulation and seal with the parapet wall.

Info

Browse our Unilin stock and refine by thickness or coverage using the left-hand filters. For product suitability discussions or bulk quotations, contact us on +4402038839057 , email sales@insulationbee or use Live Chat - Lowest UK Insulation Prices.