120mm Unilin FR-BGM Flat Roof Insulation Board

The 120mm FR-BGM Flat Roof Insulation Board from Unilin delivers superior thermal performance with a polypropylene fleece exterior, bitumen/glass fibre working surface, and mineral glass underside facing. This product is part of Unilin's comprehensive range of high-performance 120mm flat roof boards, providing complete solutions for diverse flat roof applications.

120mm Unilin FR-BGM Flat Roof Board was previously known as 120mm Xtratherm FR-BGM.

Product Specification

Brand: Unilin / Xtratherm®

Model: 120mm FR/BGM

Thickness: 25mm,30mm,40mm, 50mm, 60mm, 70mm, 80mm, 100mm, 110mm, 120mm, 130mm, 140mm, 150mm

Length: 1200mm

Width: 600mm

Board Coverage: 0.72m2

Pack Coverage: 2.16 m2

Pack Quantity: 3

R-Value: 5 m2K/W

Thermal Conductivity: 0.024W/mK

Compressive Strength: 150kPa

Dimensions: 1,200mm x 600mm x 120mm

Colour: Yellowish

Density: 32kg/m3

Material: Polyisocyanurate (PIR Insulation)

Profile: Square Edge

Inner facing: Mineral Glass

Outer facing: Bitumen/glass fibre

Shipping method: Articulated Vehicle ǀ Courier

Applications: Flat Roof

BBA Certified: Yes (No. 11/4878)

ETA Notification: Yes

Features: Thermally efficient flat roof board

About

The 120mm Unilin FR-BGM represents a key component within Unilin's extensive portfolio of high-performance flat roof boards, delivering substantial advantages for flat roof installations:

1. Exceptional thermal efficiency: This 120mm board provides outstanding insulation characteristics, enabling consistent temperature regulation and energy conservation throughout the building envelope.
2. Seamless integration with bituminous roofing: Engineered for compatibility with a comprehensive range of bituminous roofing systems, ensuring straightforward installation and reliable performance.
3. Durable fleece-finished facings: The polypropylene fleece-finished bitumen/glass fibre working surface enhances robustness and longevity, delivering a dependable, hard-wearing solution.
4. Environmental Product Declaration accreditation: This 120mm Unilin Flat Roof Insulation Board BGM holds EPD certification from the IGBC (International Green Building Council). Contact our technical support team for comprehensive details.

Key Points:

1. Delivers excellent thermal performance.
2. Incorporates fleece-finished bitumen/glass fibre facings.
3. FR-BGM permits direct application of torch on felt onto the insulation surface.
4. Fully compatible with extensive bituminous roofing system options.

Roof Design

The 120mm Unilin Insulation Boards are engineered for compatibility with a broad spectrum of bitumen-based waterproofing systems. These typically incorporate a BS EN 13707:2013 type 3G perforated base layer or proprietary roof waterproofing solutions. During installation, position the fleece side upwards, or alternatively employ full bonding. For moisture and condensation management guidance, refer to BS 8217 specifications for reinforced bitumen membranes in roofing applications.

Falls

Flat roof design must incorporate adequate fall to prevent water pooling and ensure proper drainage.

Roof Loading

The 120mm Unilin FR/BGM boards are engineered for roof decks with minimal foot traffic and reduced maintenance requirements. Where regular pedestrian access is required, install protective walkways on the roof surface. Upon completion of roof construction, lay protective boarding if additional site work is anticipated, safeguarding the roofing system's integrity.

Roof Finish

Built-up roofing systems require finishing with an appropriate reflective layer such as chippings. Consult the system manufacturer for specific recommendations.

Fire Performance

Fire ratings, determined through EN 13501-5 and BS 476 Part 3 'External Fire Exposure Roof Test' assessment, depend on the waterproofing system specification selected.

Vapour Control Layer

Prime decks before applying hot bitumen for vapour control layer bonding. Consult BS 8217 for application procedures. Extend the VCL beyond the insulation and seal at the parapet wall.

Info

Browse our Unilin stock and refine by thickness or coverage using the left-hand filters. For product suitability advice or quantity discount quotations, contact us by phone on +4402038839057, email sales@insulationbee, or use Live Chat - Lowest UK Insulation Prices.