8mm Metal Hammer Fixing for EWI – 175mm

The Metal Hammer Fixing delivers dependable performance for anchoring insulation boards across multiple substrate types. Featuring an 8mm diameter with strategically positioned anchoring zones (ABCD: 25mm, E: 45mm), this fixing combines strength with efficient installation.

Intended Uses

These metal hammer fixings are engineered to secure insulation boards to substrates A, B, C, D, and E. The plastic-coated metal pin minimises thermal bridging while maintaining structural integrity.

Ideal for concrete, brick, and blockwork applications, they work seamlessly with EPS, XPS, and Mineral Wool insulation boards. For substrate compatibility confirmation, a pull test is advisable to verify adequate load capacity for your EWI system.

Details

• 8mm hammer-in fixing with metal pin enclosed in plastic coating for EWI/ETICS thermal insulation systems
• Plastic-coated metal pin prevents thermal bridging
• Rapid installation with minimal anchoring zone requirements
• Plate stiffness rated at 1.0kN/mm
• Supports both surface and flush mounting options

Available Sizes & Quantities

• 8mm x 75mm (100 fixings per box)
• 8mm x 95mm (100 fixings per box)
• 8mm x 115mm (100 fixings per box)
• 8mm x 135mm (100 fixings per box)
• 8mm x 155mm (100 fixings per box)
• 8mm x 175mm (100 fixings per box)
• 8mm x 195mm (100 fixings per box)

Application Instructions

• Drill perpendicular to the substrate and remove any loose material.
• Create a countersink recess using a router or cutting tool.
• Position the fixing in the hole with the anchor plate level to the EWI/ETICS indented layer.
• Drive the fixing home by striking the connector pin with a hammer.
• Install a thermo dowel cap for enhanced sealing.
• Check alignment and seal thoroughly for best results.

Info

Browse our full range of insulation products and refine your selection by thickness or coverage using the left-side filters. For product suitability advice, quantity discounts, or technical guidance, contact us on +4402038839057, email sales@insulationbee or use Live Chat.