50mm EcoTherm Inno-Torch Flat Roof Insulation Board

Part of the Building Innovation product range, 50mm EcoTherm Inno-Torch Flat Roof Insulation Board delivers an efficient 50mm insulation layer for flat roofs. These high-performance boards work seamlessly with torch-on and roll-and-pour felt systems, mastic asphalt, and fully adhered single-ply systems across concrete, timber, or metal decks. Featuring thermal conductivities as low as 0.024 W/mK, 50mm Ecotherm Inno-Torch boards help you meet target U-values without excessive construction depth.

Product specification

• Thickness: 30mm - 130mm
• Board size: 1200mm x 600mm
• Pack Quantity: 6
• Coverage: 0.72m2 per board
• Pack Coverage: 4.32m2
• Thermal conductivity: 25-79mm: 0.027 W/mK, 80-119 mm: 0.025 W/mK, 120+ mm: 0.024 W/mK
• Compressive Strength: 10%
• WaterProofing: It is suitable for use with torch on and roll and pour felt systems, mastic asphalt and fully adhered single ply systems, on concrete, timber or metal decks.
• Reaction to fire: Euroclass rating of F
• Insulation Material: Inno-Torch is a high performance rigid thermoset polyisocyanurate (PIR) insulation.
• Application: For use on new roofs, refurbished or for upgrading the thermal performance of existing flat roof.
• Product suitability: Fitted with Torch-on-Felt and roll and pour felt systems, mastic asphalt and fully adhered single ply systems

Product Highlights

1. Works with torch-on, roll-and-pour felt systems, mastic asphalt, and fully adhered single-ply systems.
2. Ideal for new and existing concrete, timber, and metal deck installations.
3. Lightweight PIR flat roof insulation boards engineered for straightforward handling, cutting, and fitting.

Applications

• 50mm Inno-Torch flat roof boards suit a range of roofing applications, from new construction to roof refurbishment and thermal upgrades on existing structures.
• These boards integrate with torch-on, roll-and-pour felt systems, mastic asphalt, and fully adhered single-ply systems, and fit onto concrete, timber, or metal decks.

Water Vapour Resistance

50mm Ecotherm recommends a Condensation Risk Analysis (CRA) be completed for each project. The 50mm insulation boards should be installed over a Vapour Control Layer (VCL) or sealed metal deck. Consideration should also be given to BS 5250: 2021 (Management of moisture in buildings. Code of practice) and BS 6229: 2018 (Flat roofs with continuously supported flexible waterproof coverings. Code of practice).

Fire Performance

For guidance regarding the routes to compliance for meeting fire safety requirements please refer to the relevant Building Regulations/Standards for England, Wales and Scotland. Under System 4 AVCP, Inno-Torch has a Euroclass rating of F. Additional materials can be placed above the insulation layer within a roofing system including, but not limited to, waterproofing materials, reinforcement layers, primers and carrier membranes. These additional materials complete the roofing system. As such, the fire performance of a roofing system is predominantly determined by these finishes.

Info

Browse our full range of Ecotherm products and filter by thickness or coverage on the left-hand side of the page. To discuss product suitability for your project or request a quantity discount quotation, contact us by phone on +4402038839057, email sales@insulationbee or via Live Chat - Lowest UK Ecotherm Insulation Prices.