130mm EcoTherm Inno-Torch Flat Roof Board

Part of the Building Innovation product range, 130mm EcoTherm Inno-Torch Flat Roof Insulation Board delivers a thin yet durable insulation solution for flat roofs. These boards work seamlessly with torch-on and roll-and-pour felt systems, mastic asphalt, and fully adhered single-ply systems across concrete, timber, or metal decks. Boasting thermal conductivities of just 0.024 W/mK, 130mm EcoTherm Inno-Torch boards help you meet U-value targets without excessive build-up.

Product specification

• Thickness: 30mm - 130mm
• Board size: 1200mm x 600mm
• Pack Quantity: 3
• Coverage: 0.72m2 per board
• Pack Coverage: 2.16m2
• Thermal conductivity: 25-79mm: 0.027 W/mK, 80-119 mm: 0.025 W/mK, 120+ mm: 0.024 W/mK
• Compressive Strength: 10%
• WaterProofing: It is suitable for use with torch on and roll and pour felt systems, mastic asphalt and fully adhered single ply systems, on concrete, timber or metal decks.
• Reaction to fire: Euroclass rating of F
• Insulation Material: Inno-Torch is a high performance rigid thermoset polyisocyanurate (PIR) insulation.
• Application: For use on new roofs, refurbished or for upgrading the thermal performance of existing flat roof.
• Product suitability: Fitted with Torch-on-Felt and roll and pour felt systems, mastic asphalt and fully adhered single ply systems

Product Highlights

1. Works with torch-on, roll-and-pour felt systems, mastic asphalt, and fully adhered single-ply systems.
2. Ideal for new and existing concrete, timber, and metal decks.
3. Lightweight PIR flat roof insulation boards engineered for straightforward transportation, cutting, and installation.

Applications

• 130mm Inno-Torch flat roof boards suit numerous roofing applications, from new construction to roof refurbishments and thermal upgrades on existing roofs.
• They integrate with torch-on, roll-and-pour felt systems, mastic asphalt, and fully adhered single-ply systems, and install on concrete, timber, or metal decks.

Water Vapour Resistance

130mm EcoTherm recommends a Condensation Risk Analysis (CRA) be completed for each project. The 130mm insulation boards should be installed over a Vapour Control Layer (VCL) or sealed metal deck. Consideration should also be given to BS 5250: 2021 (Management of moisture in buildings. Code of practice) and BS 6229: 2018 (Flat roofs with continuously supported flexible waterproof coverings. Code of practice).

Fire Performance

For guidance regarding the routes to compliance for meeting fire safety requirements please refer to the relevant Building Regulations/Standards for England, Wales and Scotland. Under System 4 AVCP, Inno-Torch has a Euroclass rating of F. Additional materials can be placed above the insulation layer within a roofing system including, but not limited to, waterproofing materials, reinforcement layers, primers and carrier membranes. These additional materials complete the roofing system. As such, the fire performance of a roofing system is predominantly determined by these finishes.

Info

Browse our EcoTherm Products range and filter by thickness or coverage on the left-hand side of the page. To discuss product suitability for your project or request a quantity discount quotation, call us on +4402038839057, email sales@insulationbee or use Live Chat - Best UK EcoTherm Insulation Prices.